GAMA Top Quality Coating

GAMA Green Body Coating feature GAMA Coating feature

This product is a top-grade emerald car body coating that uses nanotechnology and combines the high technology of glaze sealing to make the car body extremely shiny, smooth, water-repellent and durable, and can be applied to any car color.
GAMA Coating is the all-purpose. The car can be extremely bright, extremely smooth, water-repellent, and durable, and can be applied to all colors.

GAMA emerald car body coating method of use Use method

Applicability:
Various car colors and models.
All colors and types of vehicles.
Main ingredients Contains:
Glass cellulose, silica polymer, fluoropolymer and high-purity water.
Glass cellulose, alizarin polymer, fluoropolymer and high purity water.
Construction steps Operation:
1. Prepare two sponges, one for the car body and one for the wheel frame, and use them for foam cleaning.
2. Use clean water to rinse the car body until it becomes hydrophilic.
3. Use an absorbent cloth to dry the entire vehicle, paying special attention to the joints of the vehicle body, handlebars, rear view mirrors or fuel caps and other places that are difficult to wipe.
4. If there are residues of old wax and water stains, use 75% alcohol with a light-colored, non-fading dyeing cloth to wipe the entire car.
5. Open the coating agent, fully wet the fiber cloth with the coating agent, use a special coating sponge, and apply it to the car body using the cross construction method.
6. When the coating agent is about to dry, gently wipe off the excess coating agent with a clean soft cloth.
7. After the coating construction is completed, isolate the water body within 24 hours and allow the coating to fully cure for 4-5 days.
1.Remove dirt or oil completely in advance.
2.If you use water to do, dry until no water drops remains.
3.We recommend masking around the area that you will apply.
4.Wear the included gloves and shake the bottle well.
5.Put the liquid on the included sponge and spread it evenly.
6.DO not touch or wet the car for 24 hours after applying.
7.The coating film takes 4-5 days to harden completely.
Notes Warning:
1. Do not place it in a high temperature place.
2. Keep out of reach of children.
3. Do not use if the body temperature is too high.
4. If it accidentally touches your eyes, please rinse with plenty of water.
1.Keep the product at the cool place.
2.Keep it out of reach of children.
3.If in eyes rinse cautiously with water for several minutes.
Save method Storage:
Store in a cool place without direct sunlight.
Store at room temperature. Avoid exposure to sunlight.
Safety instructions Safety:
1. Do not use and store it out of reach of children.
2. It is recommended to wear a mask and protective equipment when using it to avoid eye damage. If it accidentally sprays into your eyes, please rinse with plenty of water immediately and seek medical treatment as appropriate.
3. Maintain good ventilation in the workplace but avoid being close to fire sources.
4. [Capacity] 50 ML [Expiration Date] Five Years [Manufacture Date] Marked on the bottom of the bottle.
1.Keep the product at the cool place.
2.Keep it out of reach of children.
3.If in eyes rinse cautiously with water for several minutes.
4.[capacity] 50 ml [available date] 5 years [MFG] under the bottle